Product Catalog
52 products found
CABINCar Frame Assembly (Sling)
Heavy-duty car sling with upper and lower beams, stile channels and safety gear bracket. Hot-dip galvanized finish, load up to 2000 kg.
Load: up to 2000 kg | Finish: Hot-dip galvanized | EN81-20 compliant
Car Platform & Flooring
Welded steel platform with anti-vibration isolators and pre-fitted floor support channels. Compatible with all standard cabin widths 800–2200 mm.
Width: 800–2200 mm | Material: Q345B steel | Isolation: rubber anti-vib pads
Car Interior Panel Set
Stainless steel hairline-finish wall panel system. Modular panels 1.2 mm SUS304 HL, complete with handrail and return panel. Custom sizing available.
Material: SUS304 hairline | Thickness: 1.2 mm | Handrail: included
Car Operating Panel (COP)
Flush-mounted LED push-button COP panel. Supports floor indicators, emergency phone, Braille buttons and card reader provision. EN81-70 accessible.
Buttons: LED flush type | Display: TFT floor indicator | EN81-70 compliant
Car Ceiling with LED Lighting
Suspended aluminum ceiling module with integrated 36 W LED panel array. Diffuser panel, 3000 K warm white, CRI ≥ 90. Emergency lighting included.
LED: 36 W | Color temp: 3000 K | CRI: ≥90 | Emergency backup: included
Car Door Assembly (Automatic Sliding)
Two-panel centre-opening automatic car door. Stainless hairline finish, 800/900/1000 mm clear widths, light-curtain ready header.
Opening: center 2-panel | Clear width: 800/900/1000 mm | Material: SUS304 HL
2-Panel Centre-Opening Landing Door
Standard 2-panel centre-opening landing door system. SUS304 HL or powder-coat finish, fire-rated option (60 min), sill and jamb included.
Fire rating: option 60 min | Finish: SUS304 HL / powder coat | Sill: included
2-Panel Side-Opening Landing Door
Side-opening two-panel door system ideal for smaller shaft openings. Robust steel frame with integrated header cover, available in 700–1100 mm widths.
Clear width: 700–1100 mm | Frame: galvanized steel | Header cover: included
Door Sill (Stainless / Aluminum)
Extruded aluminum or SUS304 landing door sill with groove profile for smooth door guidance. Anti-slip surface treatment, custom length cuts available.
Material: Aluminum 6063-T5 / SUS304 | Profile: groove guide | Anti-slip: yes
Door Hanger & Track Assembly
Precision-machined steel door hanger with nylon-coated wheels. Adjustable eccentric suspension pin, 80 kg per leaf capacity, compatible with 15 mm track.
Load: 80 kg/leaf | Wheels: nylon-coated steel | Track width: 15 mm
Interlock Lock Device
EN81-20/50 certified door interlock with mechanical and electrical double-locking. Direct-contact switch verification, 10 million cycle endurance rating.
Standard: EN81-20/50 | Lock type: mechanical + electrical | Cycles: 10M
8×19 Seale IWRC Suspension Rope
Primary suspension rope with independent wire rope core (IWRC). Construction 8×19 Seale, bright or galvanized finish. Available Ø8–16 mm. EN 12385-5 certified.
Dia: Ø8–16 mm | Construction: 8×19 Seale IWRC | Cert: EN 12385-5
8×25Fi Filler Wire Rope
High-flexibility filler-wire construction for improved bend fatigue life. Ideal for traction sheave drives. Ø10–13 mm, Minimum Breaking Force tested per ISO 2408.
Dia: Ø10–13 mm | Construction: 8×25Fi | Standard: ISO 2408
Compensating Rope & Chain
Plastic-coated or bare steel compensating rope/chain for high-rise applications. Noise-suppression chain links, Ø10–16 mm rope option, 20–80 kg/m chain.
Types: rope / chain | Rope dia: Ø10–16 mm | Chain: 20–80 kg/m
Governor Rope
Speed governor wire rope Ø6–10 mm. Compact flexible 6×19 construction, high fatigue resistance, individually tested to manufacturer's certificate.
Dia: Ø6–10 mm | Construction: 6×19 | Certification: per reel
Rope End Socket (Taper Babbit)
Cast-steel taper socket for wire rope terminations. Babbit or resin filling, sizes Ø8–16 mm, load factor ≥ 2.5× rope MBF. Traceability document included.
Rope dia: Ø8–16 mm | Fill: babbit/resin | Load factor: ≥2.5× MBF
Flat Traveling Cable 30C
30-conductor flat traveling cable for elevator car power and control signals. PVC/HFFR jacket, rated 300/500 V, flex tested 2 million cycles. CEI/IEC 60227 compliant.
Conductors: 30C | Voltage: 300/500 V | Flex cycles: 2M | IEC 60227
Flat Traveling Cable 48C
48-conductor flat cable supporting additional signal, data and video circuits for modern intelligent elevators. Screened pairs option, 300/500 V, UL/CSA listed.
Conductors: 48C | Voltage: 300/500 V | Option: screened | UL/CSA listed
Round Traveling Cable
Heavy-duty round traveling cable for high-rise and hydraulic elevators. Strain-relief steel core, 300/500 V, 20–48 conductors, oil and heat resistant jacket.
Conductors: 20–48C | Voltage: 300/500 V | Jacket: oil & heat resistant
Coiled Traveling Cable
Pre-coiled telephone-style traveling cable for short-travel hydraulic elevators. 6-conductor, retractile to 2.5 m extended length, plug-and-play connector option.
Conductors: 6C | Extended length: up to 2.5 m | Connector: optional
LSZH Flat Cable (Fire-Resistant)
Low smoke zero halogen (LSZH) flat traveling cable for high-rise safety requirements. IEC 60332-3-C flame retardant, reduced toxic gas emission in fire conditions.
Conductors: 30–48C | Jacket: LSZH | IEC 60332-3-C certified
T75/A Guide Rail
ISO 7465 T75/A cold-drawn steel guide rail for passenger elevators. Machined guiding surface, straightness ≤ 0.3 mm/m, 5 m standard length with fish plates.
Profile: T75/A | Standard: ISO 7465 | Length: 5 m | Straightness: ≤0.3 mm/m
T89/B Guide Rail
Heavy-duty T89/B guide rail for freight and high-load elevators up to 5000 kg. Hot-rolled and precision-machined flanges, 5 m length, supply with rail joint plates.
Profile: T89/B | Load: up to 5000 kg | Length: 5 m | Joint plates: included
Hollow T-Guide Rail
Hollow-section T guide rail for weight reduction in MRL and residential elevators. 30% lighter vs solid rail, ISO 7465 Class A, with integral lubrication groove.
Profile: Hollow T | Weight: 30% less vs solid | Class: ISO 7465-A
Guide Rail Bracket
Adjustable three-axis steel guide rail bracket for shaft fixing. Hot-dip galvanized, pitch 2.5 m standard. Adjustable ±40 mm X/Y axis, T-bolt slot included.
Adjust: ±40 mm X/Y | Pitch: 2.5 m std | Finish: hot-dip galvanized
Rail Clip & Fishplate Set
High-strength steel rail clips and fishplates for guide rail jointing and fixing. Grade 8.8 hex bolts, compatible with T70–T125 profiles, black oxidize finish.
Grade: 8.8 bolts | Compat: T70–T125 | Finish: black oxide
Guide Rail Lubricant Oil
Semi-synthetic guide rail oil with extreme-pressure additives. Reduces wear and noise on T-rail contact surfaces. ISO VG 68, 1 L / 18 L drum, REACH compliant.
Viscosity: ISO VG 68 | Pack: 1 L / 18 L | Standard: REACH compliant
Wire Rope Dressing
Penetrating rope dressing for steel wire rope lubrication. Anti-corrosion, water-repellent, ISO VG 460 equivalent. Aerosol 500 ml and 5 L pail available.
Viscosity: ISO VG 460 equiv | Pack: 500 ml aerosol / 5 L pail | Anti-corrosion: yes
Gear & Worm Drive Oil
Heavy-duty worm gear oil for elevator traction machines. ISO VG 460, enhanced film strength and thermal stability. 20 L and 200 L barrel packs.
Viscosity: ISO VG 460 | Pack: 20 L / 200 L | Application: worm gear traction
Guide Shoe Lubricating Pad Refill
Pre-saturated felt pad refill kits for sliding guide shoes. Slow-release oil retention, fits standard 50×50 mm shoe pocket. Pack of 10 pads.
Size: 50×50 mm | Pack: 10 pads/set | Type: pre-saturated felt
Emergency Intercom Unit (Car)
EN81-28 certified car emergency telephone. Auto-dials up to 3 preset numbers, hands-free operation, 24 V DC powered from controller, stainless panel.
Standard: EN81-28 | Power: 24 V DC | Auto-dial: 3 numbers | Panel: SUS304
PSTN / VoIP Gateway Module
Dual-mode PSTN and VoIP communication gateway for elevator emergency calls. RJ11 and RJ45 ports, supports SIP 2.0, DIN rail mounting, 18–32 V DC.
Protocols: PSTN + SIP 2.0 | Ports: RJ11 + RJ45 | Mounting: DIN rail | 18–32 V DC
Machine Room Intercom Station
Wall-mounted machine room intercom with clear speaker and robust push-to-talk button. IP54 rated enclosure, communicates with car and lobby stations.
IP rating: IP54 | Mount: wall | Comm: 2-wire | Speaker: 0.5 W built-in
Terminal Limit Switch (Upper / Lower)
Lever-operated terminal limit switch for elevator shaft top and bottom overtravel protection. NC/NO contacts, IP54, 10A 250 V AC, 10M cycle rated.
Contacts: NC + NO | Rating: 10 A 250 V AC | IP: 54 | Cycles: 10M
Final Limit Switch (Safety Circuit)
Positive-opening final limit switch for safety circuit. Complies with EN81-20 direct-contact requirement, IP65, snap-action cam-operated, gold-plated contacts.
Standard: EN81-20 | IP: 65 | Contact: gold-plated | Action: positive opening
Door Zone & Leveling Sensor
Inductive proximity sensor for floor leveling and door zone detection. PNP / NPN output, 12–24 V DC, sensing range 8 mm, IP67 housing for pit environments.
Output: PNP / NPN | Supply: 12–24 V DC | Range: 8 mm | IP: 67
Pit Stop Switch
Lockable mushroom-head pit stop switch for maintenance. Twist-release, rated 16 A 400 V AC, red mushroom head, IP55 yellow enclosure, EN81-20 compliant.
Rating: 16 A 400 V AC | IP: 55 | Head: mushroom twist-release | EN81-20
LED Hall Indicator Board (Segmented)
Classic 7-segment LED hall indicator with up/down arrows and floor display. Red or amber LED, 3.5-inch display, panel-mount or surface-mount, 24 V DC.
Display: 7-segment LED 3.5" | Power: 24 V DC | Mount: panel / surface | Colors: red / amber
TFT LCD Hall Indicator
Full-color 4.3" TFT LCD hall indicator board with animated arrows, floor number and media display. RS485 / CAN-bus, 12–24 V DC, portrait or landscape orientation.
Display: 4.3" TFT LCD | Comm: RS485 / CAN | Power: 12–24 V DC | Media: yes
Hall Lantern (Chime + Arrow)
Flush or surface-mounted hall lantern with LED arrow and chime announcement. Single or bi-directional, stainless steel finish, 24 V DC, fits standard jamb cutout.
Mount: flush / surface | Power: 24 V DC | Finish: SUS304 | Chime: built-in
Standard LED Push-Button COP
Flush-mounted stainless LED COP panel for 2–30 floors. Illuminated floor buttons, door open/close, emergency stop, Braille tags, 24 V DC bus, EN81-70.
Floors: 2–30 | Power: 24 V DC | Braille: included | Standard: EN81-70
Vandal-Resistant COP
Hardened steel COP with anti-vandal flat disc buttons. Key switch provision, stainless hairline fascia, rated for IP54 environments, tamper-proof screws.
Button: anti-vandal disc | IP: 54 | Fascia: SUS304 HL | Key switch: provision
Touchscreen COP
Capacitive touch 7" color screen COP for modern premium elevators. Gesture floor selection, media/advertising display, card reader integration, antibacterial coating.
Screen: 7" capacitive touch | Media: supported | Card reader: integrated | Coating: antibacterial
Elevator VFD 5.5–11 kW
Compact variable frequency drive for low-rise traction elevators. V/F and sensorless vector control, built-in EMC filter, DIN rail mount, 380–480 V 3-phase.
Power: 5.5–11 kW | Control: V/F + sensorless vector | Supply: 380–480 V 3Ø
Elevator VFD 15–30 kW (Regenerative)
Mid-range VFD with active front-end regenerative unit for energy recovery. CAN-open encoder interface, 15–30 kW, THD < 5%, silent PWM 16 kHz.
Power: 15–30 kW | Feature: regenerative AFE | THD: <5% | PWM: 16 kHz
High-Power VFD 45–90 kW
High-rise elevator drive 45–90 kW with full closed-loop vector control. Absolute encoder PG card, ride comfort tuning software, IP20 cabinet, SIL2 safety function.
Power: 45–90 kW | Encoder: absolute PG | Safety: SIL2 | IP: 20
Sliding Guide Shoe (Oiles)
Self-lubricating Oiles sintered bronze sliding guide shoe for passenger elevators. Fits T75/A and T89/B rails, adjustable gibs, rated up to 1.75 m/s.
Material: Oiles sintered bronze | Rails: T75/A, T89/B | Max speed: 1.75 m/s
Roller Guide Shoe Assembly
Three-roller guide shoe with spring pre-load for high-speed elevators. Polyurethane rollers Ø100 mm, fits T75–T89 rails, pre-load adjustable 5–30 N, up to 4 m/s.
Rollers: PU Ø100 mm | Pre-load: 5–30 N | Rails: T75–T89 | Max speed: 4 m/s
Counterweight Guide Shoe
Heavy-duty sliding guide shoe for counterweight frames. Nylon insert pad, adjustable clearance, rated 3000 kg static load, fits T70–T125 rail profiles.
Pad: nylon insert | Static load: 3000 kg | Rails: T70–T125 | Clearance: adjustable
Centrifugal Governor 1.0–1.75 m/s
Standard centrifugal overspeed governor for low-to-mid speed elevators. EN81-20 type test, electrical and mechanical trip, bi-directional, tripping speed ±5%.
Speed: 1.0–1.75 m/s | Standard: EN81-20 | Trip: mechanical + electrical | Direction: bi-directional
High-Speed Governor 2.0–2.5 m/s
High-speed bidirectional governor with encoder output for monitoring integration. Tripping speed 2.0–2.5 m/s, cast-iron housing, EN81-20 / EN81-50 compliant.
Speed: 2.0–2.5 m/s | Output: encoder | Housing: cast iron | EN81-20/50
Governor Tension Sheave Assembly
Bottom tension sheave and frame for governor rope tensioning. Cast iron sheave Ø300 mm, adjustable tension weight, rope groove profile matches Ø6–10 mm rope.
Sheave dia: Ø300 mm | Rope: Ø6–10 mm | Tension: adjustable weight | Material: cast iron
Can't find the part you need?
We supply 500+ elevator component SKUs. Reach our Tokyo office for a custom quotation.